What Size Cover Fits a Ninja Artisan Pizza Oven?
Choose a cover only after checking the exact Ninja Artisan model and its outside dimensions. Confirm that the cover clears the oven’s chimney and fits without leaving openings where rain and debris can get in.
On this page (6 sections)
Choose a cover only after checking the exact Ninja Artisan model and its outside dimensions. Measure the oven with its chimney and other parts in the position you plan to cover, then compare those measurements with the cover’s stated fit.
The Ninja Artisan name alone doesn’t confirm that a cover will fit. Models and cover shapes differ, so check the model label and measure the widest, deepest and tallest points before buying.
A close fit helps keep rain and debris out, while enough room makes the cover easier to put on and take off. For general storage advice, see How to Store a Pizza Oven Outside?.
What size cover fits a Ninja Artisan pizza oven?
The right cover is one that matches your oven’s exact dimensions and chimney setup. Don’t choose by brand name or a cover’s general “pizza oven” label alone.
Measure the oven’s width, depth and height at the widest points. Include handles, knobs, shelves or other parts that remain attached while it’s covered.
| Measurement | What to include |
|---|---|
| Width | The widest side-to-side point, including handles |
| Depth | The front-to-back distance, including protruding controls |
| Height | The oven top and any chimney that stays attached |
| Shape | Any raised corners or uneven areas that affect the fit |
Compare each measurement with the cover’s stated dimensions and shape. A cover’s outside size may not match the space available inside, so check how the maker defines its measurements.
If you’re deciding between models, the best Ninja pizza oven cover guide can help you compare cover options. For another model-specific example, see what size cover fits a Mont Alpi pizza oven.
How should you measure a Ninja Artisan oven for a cover?
Measure the oven when it’s cool and in the same setup you plan to store. If the chimney stays attached, include it in the height measurement.
Use a tape measure and record the maximum width, depth and height. Note anything that sticks out, such as handles, a control knob or a chimney cap.
Check the oven manual for instructions about removing parts or covering the unit. Don’t assume a cover can go over a hot oven or that the chimney should be removed.
Does the cover need to fit over the chimney?
A cover needs enough height and clearance for the chimney if you plan to leave it attached. Some covers are designed to fit around an attached chimney, while others may not accommodate one.
Check the cover’s description for an opening or chimney-friendly design. If that detail isn’t clear, compare the measurements and confirm the fit before ordering.
The TwoPone cover is described as fitting BIG HORN 12 and aidpiza 12 ovens, and its design allows a chimney to remain connected. Its stated dimensions are 23.2 x 15.35 x 20.8 in, so compare those measurements with your Ninja Artisan before considering it.
A compatible cover should settle over the oven without forcing the fabric or leaving a large gap. If it catches on the chimney or controls, it may not be the right shape.
What outdoor protection should you look for?
Look for a cover whose material and closure suit the weather and storage spot. Waterproofing can help with rain, while straps or snaps can help keep the cover in place.
The products below are covers for other ovens, so their fit on a Ninja Artisan is not established. You can also compare Bertello pizza oven covers by their stated features and dimensions.
Use their features as examples of what to compare, and verify model compatibility and dimensions before choosing any cover.
The Gozney Roccbox Pizza Oven Cover is designed for the Roccbox. Gozney describes it as waterproof and says it protects against rain, wind, frost, UV, salt, insects and wildlife; it also has front and rear drawstrings and a heavy-duty strap.
The BIG HORN Outdoors 12Inch Pizza Oven Cover is sized for a BIG HORN 12 in oven, with dimensions of 23.2 x 15 x 25.6 in. BIG HORN describes its polyester fabric as waterproof and weather resistant, and the cover has handles and a storage bag.
For another brand’s model-specific cover, compare the best cover for a Blackstone pizza oven. If you’re choosing oven accessories too, our guide to the best pizza steel for pizza ovens covers a different kind of fit question.
How can you keep an outdoor oven protected?
A well-fitting cover can help shield an outdoor oven from weather and debris. Let the oven cool fully before covering it, and follow the oven maker’s instructions for storage.
Check that the cover closes securely around the oven. If it has straps, drawstrings or snaps, use them as intended so loose fabric doesn’t flap in wind.
Remove standing water, leaves and dirt from the oven before putting on the cover. Follow the cover maker’s cleaning and drying directions; for the TwoPone cover, the care directions say to hose it down and let it dry in the sun or with a towel.
Inspect the cover from time to time for tears, loose fasteners or trapped moisture. A cover can protect the exterior, but it doesn’t replace safe storage or the oven’s care instructions.
What should you check before buying a Ninja Artisan cover?
Confirm the model, measurements and chimney arrangement before choosing a cover. Then compare the closure and material with where you’ll store the oven.
- Model: Match the cover to the exact Ninja Artisan model.
- Dimensions: Compare width, depth and height, including attached parts.
- Chimney: Check whether it remains attached and whether the cover accommodates it.
- Closure: Look for straps, drawstrings or snaps that suit your storage spot.
- Care: Read instructions for cleaning, drying and outdoor use.
A cover made for another oven may still be worth comparing, but its stated fit does not confirm compatibility with a Ninja Artisan. For example, both the Gozney and BIG HORN covers above are designed for their named oven models.
Which cover should you choose for a Ninja Artisan pizza oven?
Pick a cover only when its dimensions and chimney design match your exact Ninja Artisan setup. If you can’t confirm that fit, keep measuring or ask the cover maker before buying.
Use the Gozney, TwoPone and BIG HORN covers as examples of features to compare, not as confirmed Ninja Artisan fits. For more cover options and fit guidance, start with the best Ninja pizza oven covers.
A pizza oven is built around high heat and a cooking surface, so store it only as its instructions allow. Learn the basics in What Is a Pizza Oven and How Does It Work?.
Frequently asked questions
Will a Ninja Artisan pizza oven cover fit every Ninja model?
No. A cover may be shaped for one particular oven, and dimensions or chimney arrangements can differ across models.
Check the model name and measure the oven’s widest, deepest and tallest points, including parts that stay attached during storage.
Compare those measurements with the cover’s interior dimensions before buying.
Can I leave a pizza oven cover on outdoors?
A cover can help shield an oven from rain, dust and sun, but outdoor protection depends on its material, fit and closure. Let the oven cool fully before covering it, keep the cover clear of hot surfaces, and follow the oven and cover makers’ care instructions.
Should I remove the Ninja Artisan chimney before covering it?
Check the cover’s design and the oven’s instructions first. Some covers are made to fit over an attached chimney, while others may not have enough height or an opening for it.
Measure with the chimney in the position you plan to store the oven, then choose a cover that fits that setup.
How do I measure a pizza oven for a cover?
Measure the oven’s maximum outside width, depth and height, including handles, knobs or a chimney if they remain attached under the cover. Compare each measurement with the cover’s interior size and allow for the shape of the oven.
A cover that is too tight may not close fully.
